Wood Stove Sock Puppet

They say, "Necessity is the mother of invention." I've written frequently about the wood stove that is the heart of our cabin, especially in winter. Over the years, we've learned a lot about living with a wood stove. Not all of those lessons have been easy. One of the most difficult was smoke blowing back into the cabin, especially during windy storms. One solution was the installation of a revolving weather chimney cap.

The cap works well, but only if creosote is cleaned from it's underside and the chimney pipe. Because we use our stove almost 24/7 during the winter, we find that we need to do that cleaning once a month. We pick a fairly warm day and let the fire die. First we disconnect the interior pipe and manually clean it's interior, paying special attention to the 90 degree turn through the cabin's wall.

Next, Wayne goes up on the roof to clean the chimney cap and exterior pipe. When our good friend John installed our new cap, he also installed a new section of outdoor pipe with a T-joint and a built in clean-out hatch. This really works well for cleaning the vertical pipe, but it actually makes it harder to clean out the exterior portion of the 90 degree turn as the pipe goes through the cabin wall.

Here's where my invention comes in. I call it my wood stove sock puppet. We needed a device that was flexible enough to feed through the bottom of the pipe and up into the 90 degree bend to scoop out the creosote. A bent wire coat hanger, an old sock and some twisties from bulk food bags were recycled into the perfect tool. Now our chimney pipe can be clean from top to bottom.

If you need to more information about troubleshooting wood stove issues and problems, try some of these websites. -- Margy